ADJ Products, LLC - www.adj.com - MOD QW100 User Manual Page 20
MOD QW100
System Menu
MENU
DESCRIPTION
DMX MODE ADDR:001~512 Sets the DMX starting address
DMX MODE
Set the unit DMX channels
CHAN:4/5/6/9/10
DMX MODE NO:BLACK
When DMX signal is lost or interrupted,the unit will default to BLACKOUT option.It will
switch all LED’s off
DMX MODE NO:HOLD
When DMX signal is lost or interrupted,the unit will default to HOLD option.It will hold the
last state before signal was lost.
DMX MODE NO:AUTO
When DMX signal is lost or interrupted,the unit will default to AUTO option.It will run the
internal programs.
DMX MODE NO:MANUA
When DMX signal is lost or interrupted,,the unit will default to the manual color setting
DMX MODE DELAY:0~4
Select the unit delay mode
SLAVE MODE
Set the unit into slave mode
MANUAL RED:000~255
Adjust the intensity of the red color
MANUAL GREN:000~255
Adjust the intensity of the green color
MANUAL BLUE:000~255
Adjust the intensity of the blue color
MANUAL WHIT:000~255
Adjust the intensity of the white color
MANUAL STROB:00~15
Adjust the flash speed,00 is flash off,01 is slowest,15 is fastest
JUMP RUN SNAP:01~16
Select the 16 color change modes
JUMP RUN SPEED:01~16
Adjust the speed of the color change mode
FADE RUN SNAP:01~16
Select the 16 color dreaming modes
FADE RUN SPEED:01~16
Adjust the speed of the color dreaming mode
AUTO RUN FAD+SNAP
Select the auto run mode
AUTO RUN SPEED:01~16
Adjust the speed of the auto run mode
CLR MACS COLOR:00~64
Select the 64 static colors
CLR MACS STROB:00~15
Adjust the strobe speed,00 is strobe off,01 is slowest,15 is fastest
OPTION BLGT:ON
LCD backlight always on
OPTION BLGT:OFF
LCD backlight will be off after 20 seconds
OPTION IR:ON
IR remote function on
OPTION IR:OFF
IR remote function off
OPTION SYSRESET
Initialize the unit at the extra factory setting
SOUND PRO:01~16
Select the 16 sound active modes
SOUND SENS:00~08
Adjust the sound active sensitivity level,00 is sound active off,01 is the lowest level,8 is
highest level.
