ADJ MOD QW100 User Instructions Download

Page: 4 / 32

ADJ Products, LLC - www.adj.com - MOD QW100 User Manual Page 3

MOD QW100

Introduction

Unpacking: Thank you for purchasing the MOD QW100 by ADJ Products, LLC. Every MOD QW100

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts are missing, please contact our

toll free customer support number for further instructions. Do not return this unit to your dealer without

first contacting customer support.
Introduction: The ADJ MOD QW100 is a DMX intelligent, high powered LED par fixture. This fixture

can be used in a stand alone set up or connected in a Master/Slave set up. The MOD QW100 has

seven operating modes: Sound Active mode, Auto Run mode, Color Change mode, Color Fade mode,

RGBW Dimmer mode, Static Color mode, and DMX controlled. To optimize the performance of this

product, please read these operating instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information regarding the use and maintenance

of this unit. Please keep this manual with the unit, for future reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit

forums.adj.com

with questions, comments or suggestions.

Parts: To purchase parts online visit

http://parts.americandj.com

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | support@adj.com
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | support@adj.eu

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 |

www.adj.com

info@adj.com

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99

www.adj.eu

info@adj.eu

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

Warning!

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or

moisture.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

doing so will void your manufactures warranty. In the unlikely event your unit may require service

please contact ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Summary of Contents for MOD QW100

































Search results

Summary of Contents for MOD QW100

Reviews:

Related manuals for MOD QW100

Brands by name

Popular brands

ADJ MOD QW100, User Instructions

Search results

Summary of Contents for MOD QW100

Reviews:

Related manuals for MOD QW100

Brands by name

Popular brands