A.D.J. Supply Europe B.V. – www.americandj.eu – Mystic LED Instruction Manual Page 3
INTRODUCTION
Unpacking:
Thank you for purchasing the Mystic LED™ by American DJ®. Every Mystic LED™ has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case
damage has been found or parts are missing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contacting customer support.
Introduction:
The Mystic LED™ is part of American DJ’s continuing pursuit for creating high quality affordable
intelligent fixtures. The Mystic LED™ is a DMX intelligent LED moonflower effect. This fixture light weight and
compact which makes it a great piece for mobile DJ’s and clubs. This unit can be used in a stand alone sound-
active mode or can be controlled via DMX controller.
Customer Support:
If you encounter any problems, please contact your trusted American Audio shop.
We also offer the possibility, to contact us directly: You can contact us via our website
www.amerciandj.eu
or
via email:
support@americandj.eu
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly into the light source at all times!
PLEASE recycle the shipping carton whenever possible.
GENERAL INSTRUCTIONS
To optimize the performance of this product, please read these operating instructions carefully to familiarize
yourself with the basic operations of this unit. These instructions contain important safety information regarding
the use and maintenance of this unit. Please keep this manual with the unit, for future reference.
FEATURES
• Sound Active Mode and Preset Program
• Color Strobe
• Output Similar to a 250W Halogen Lamp*
• Built in Microphone
• DMX-512 protocol (Uses 4 DMX Channels)
• UC3 Control (Not Included)
*Output based on visual side-by-side
comparison with halogen fixtures
SAFETY PRECAUTIONS
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt- age for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or
break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock
and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between
this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out` doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
