ADJ Products, LLC - www.adj.com - VBar Pak User Manual Page 14
ADJ Products, LLC - www.adj.com - VBar Pak User Manual Page 15
VBar Pak 3 Channel Mode
Channel Value
Function
1 COLOR MACROS
0 - 255 PLEASE SEE 1 CHANNEL MODE
2 MASTER DIMMER
0 - 255 0% - 100%
3 STROBING
0 - 15 OFF
16 - 255 SLOW - FAST
Channel Value
Function
1 COLOR MACROS
0 - 15 OFF
16 - 31 RED
32 - 47 GREEN
48 - 63 BLUE
64 - 79 AMBER
80 - 95 RED & GREEN
96 - 111 RED & BLUE
112 - 127 RED & AMBER
128 - 143 GREEN & BLUE
144 - 159 GREEN & AMBER
160 - 175 BLUE & AMBER
176 - 191 RED & GREEN & BLUE
192 - 207 RED & GREEN & AMBER
208 - 223 RED & BLUE & AMBER
224 - 239 GREEN & BLUE & AMBER
240 - 255 RED & GREEN & BLUE & AMBER
VBar Pak 1 Channel Mode
VBar Pak 2 Channel Mode
Channel Value
Function
1 COLOR MACROS
0 - 255 PLEASE SEE 1 CHANNEL MODE
2 MASTER DIMMER
0 - 255 0% - 100%
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX Mode and address.
1. Before connecting to an DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the “+” or “-” buttons to
scroll through the DMX Channel Modes. See DMX Mode on page
13.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the “Set Address” button. When the “Set Add-
ress” button is pressed the LED’s will flash 2-3 times and all the
red LED’s will light. Use the number buttons to press in your de-
sired address. See “SET ADDRESS” on page 13 above for exam-
ples.
Note: When setting the DMX address, each time a number is pressed
a LED color will glow, when you have set the DMX address correctly
all LED’s will flash 2-3 times.
3. Now you may connect the fixture via the XLR connections to any
standard DMX controller. Please see pages 15-20 to for a detailed
descriptions of the DMX modes, values, and traits.
VBar Pak ADJ LED RC2
VBar Pak Photometric Chart
