ADK-450 Administrator guide
رصعیلو نادیم : سردآ
کلاپ قیاقش نابایخ نایناریا ژاساپ بنج
8
دحاو
1
: نفلت
1811
8888
121
: سکاف
1111
8888
121
WWW.KAVOSHPHONE.COM
AMIR@KAVOSHPHONE.COM
@ADKPBX
60 / 86
3.7.7 Callback
ADK-450 allows caller A to dial an inbound route number, and after hearing
the ring, A can hang up the call or wait for ADK-450 to cut off the call, then
ADK-450 will call A with this number. When A picks up the call, A can dial the
number he wants to call; ADK-450 will call the number with its outbound
route.
Notes:
1. If you’d like to use callback feature, please make sure it’s enabled on the
inbound route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the
caller ID directly.
Figure 3-7-7 Callback
Follow the steps below to use this function.
Step 1: Enable Callback.
Inbound Routes—Choose “Yes” on” Enable Callback” to enable this function.
Step 2: Create Callback number.
Figure 3-7-7 Callback Edit/Add
