Power: 80W
Supply voltage: 230V~50Hz
TECHNICAL DATA
NOTICE: Do not immerse the massager in water or other liquids to avoid water penetrating into the inside of device.
3.
In order to clean the device, use cloth with washing-up liquid. Rinse the massager bowl and wipe dry.
2.
Never immerse whole device in water.
1.
Make sure that the device is disconnected from the power and is not warm.
CLEANING THE DEVICE
8.
Wait until the device cools, clean according to the description in “Cleaning the device” section.
7.
After using the massager switch the power knob to “off” position, remove feet from the water and wipe them dry. Disconnect the
massager from the power circuit.
-
4: Infrared massage, maintaining water temperature
-
3: Vibration and bubble massage in warm water, maintaining water temperature
, infrared lamp on
-
2: Vibration and bubble massage in cold water
6.
Choose one of available massaging programmes (fig 2).
5.
Sit comfortably and put the feet in the massager. Never stand on the massager.
4.
Connect the massager to the power. Never unplug the massager if your feet are immersed in water.
3.
Choose one of three attachments (4, 5, 6) and place it in appropriate place of the massager (as shown on
fig. 1).
2.
Fill the tank with warm or cold water, depending on your preferences. Do not fill above MAX mark. NOTICE: The device has water
temperature maintaining feature, not water warming feature.
1.
Make sure that the device is disconnected from the power, and the power knob is set to “off” position (fig.
2.1).
DEVICE UTILIZATION
7.
Antisplash cover
8.
Infrared lamp
5.
“brush” attachment
6.
Attachment with wheels
3.
rollers
4.
Attachment with insets
22. FIll the device only with water. Do not use any oils or bathing solutions, gels and
substances.
21. Do not use when standing. Only use in sitting possition.
1.
casing
2.
Power switch knob
DESCRIPTION OF THE DEVICE (fig 1)
water.
24. Do not use the device more than 10 minutes without breaks.
23. If you have any concerns about your health please contact a phisician before use.
Users with heart problems, heart pacemakers, diabedic or other health problems. Pregnant
women and users complaining on prelonged joint and muscle pains. Long lasting and
frequent pains may be warning sighns of serious ilness please consult a Doctor.
Device marked CE mark on rating label
- Electromagnetic compatibility (EMC)
- Low voltage directive (LVD)
Device is compliant with EU directives:
Device is made in class II of insulation.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding
waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous
components, which may effect the environment.
Do not dispose this appliance in the common waste bin.
Summary of Contents for AD 2167
