56
BIOS Setup
Leading
EDGE COMPUTING
Parity
None
Even
Odd
Configures if parity bit is generated
(transmit data) or checked.
A parity bit can be sent with the data
bits to detect some transmission
errors. Even: parity bit is 0 if the num
of 1's in the data bits is even. Odd:
parity bit is 0 if num of 1's in the data
bits is odd. Mark: parity bit is always
1. Space: Parity bit is always 0. Mark
and Space Parity do not allow for
error detection. They can be used as
an additional data bit.
Stop Bits
1
2
Configures the number of stop bits
transmitted and received in each
serial character for both serial ports.
Stop bits indicate the end of a serial
data packet. (A start bit indicates the
beginning). The standard setting is 1
stop bit. Communication with slow
devices may require more than 1
stop bit.
Flow Control
None
Hardware
Software
Configures flow control for console
redirection. Hardware flow control
uses RTC/CTS. Software flow
control uses XON/XOFF.
VT-UTF8 Combo
Key Support
Disabled
Enabled
Enable VT-UTF8 combination key
support for ANSI/VT100 terminals.
Recorder Mode
Disabled
Enabled
With this mode enabled only text will
be sent. This is to capture terminal
data.
Resolution 100x31
Disabled
Enabled
Enables or disables extended
terminal resolution.
Putty KeyPad
VT100
LINUX
XTERMR6
SCO
ESCN
VT400
Select Function Keys and Key Pad
on Putty.
BIOS Item
Options
Description
Summary of Contents for AVA-5500 Series
Page 8: ...viii Table of Contents Leading EDGE COMPUTING This page intentionally left blank ...
Page 10: ...x List of Figures Leading EDGE COMPUTING This page intentionally left blank ...
Page 12: ...xii List of Tables Leading EDGE COMPUTING This page intentionally left blank ...
Page 76: ...64 BIOS Setup Leading EDGE COMPUTING This page intentionally left blank ...