82
BIOS
Stop Bits
1
2
Configures the number of stop bits
transmitted and received in each
serial character for both serial ports.
Stop bits indicate the end of a serial
data packet. (A start bit indicates the
beginning). The standard setting is 1
stop bit. Communication with slow
devices may require more than 1
stop bit.
Flow Control
None
Hardware
Software
Configures flow control for console
redirection. Hardware flow control
uses RTC/CTS. Software flow
control uses XON/XOFF.
VT-UTF8 Combo
Key Support
Disabled
Enabled
Enable VT-UTF8 combination key
support for ANSI/VT100 terminals.
Recorder Mode
Disabled
Enabled
With this mode enabled only text will
be sent. This is to capture terminal
data.
Resolution 100x31
Disabled
Enabled
Enables or disables extended
terminal resolution.
Legacy OS
Redirection
Resolution
80x24
80x25
Set console display resolution.
Putty KeyPad
VT100
LINUX
XTERMR6
SCO
ESCN
VT400
Select Function Keys and Key Pad
on Putty.
Redirection After
BIOS POST
Always Enabled
BootLoader
The setting specifies if BootLoader is
selected, then legacy console
redirection is disabled before booting
to legacy OS.
BIOS Item
Options
Description
Summary of Contents for DMI-1040
