48
MCS-2040
Appendix I. Intel® AMT Setup Guide
Intel® AMT Configuration
When you explore MEBx options for the first time (Factory phase), default settings are in
place. This section details the settings recommended by ADLINK, some of which may be the
same as the default selections.
Even though the default setting is used for many options, it is good practice to double-check
important options. For setup and configuration, perform the following procedure:
1. Reboot the system and enter the main menu for MEBx setup shown below by pressing
<CTRL-P> during POST.
2. Select
MEBx Login
and enter the case-sensitive, default password (
admin
), which must
be changed before making any changes in the MEBx.
3. Provide a strong, new MEBx password using the criteria listed below. Repeat the
password for verification.
x
8 – 32 characters long
x
Upper- and lower-case Latin characters (for example: A, a, B, b)
x
At least one digit (for example: 0, 1, 2… 9).
x
One of the following non-alphanumeric characters:
à
Exclamation !
à
At
@
à
Number
#
à
Dollar
$
à
Percent
%
