Function Library
175
6.3 Initialization
@ Name
_8164_initial
– Card Initialization
_8164_initialx
– Card Initialization with I/O base address and
IRQ channel
_8164_close
– Card Close
_8164_get_base_addr
– Get the base address of 8164_
_8164_get_irq_channel
– Get the 8164 card’s IRQ number
_8164_delay_time
– delay execution of program for specified
time in units of ms.
_8164_config_from_file
– Configure 8164 card according to
configuration file i.e. 8164.ini.
_8164_version_info
– Check hardware and software version
information
@ Description
_8164_Initial
:
Initializes the card without assigning the hardware resources. All
8164 cards must be initialized by this function before calling other
functions. The card uses this function in all platforms because it is
Plug and Play compatible. The MPC-8164 uses this function in
Windows
®
98/NT/2000/XP.
_8164_initialx
:
Initializes the cards with an I/O base address and IRQ channel.
The MPC-8164 uses this function under DOS, Windows
®
CE, and
Linux.
_8164_close
:
Closes the card and releases its resources. This function must be
called at the end of an application.
_8164_get_irq_channel
:
Gets the card’s IRQ number.
Summary of Contents for MPC-8164
