BIOS Setup
•
35
4.4
Intel 440BX Chipset Features Setup
ROM PCI/ISA BIOS (2A69KMHB)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC
IN0 (V) : 1.95V
IN1 (V)
: 2.51V
IN2 (V) : 3.28V
IN3 (V)
: 5.26V
IN4 (V) : 12.03V
IN5 (V)
: -11.48V
IN6 (V) : -4.78V
Shutdown Temperature
: 60
°
C/140
°
F
Auto Configuration
: Enabled
EDO DRAM Speed Selection
: 60ns
EDO CASx# MA Wait State
: 1
EDO RASx# Wait State
: 1
SDRAM RAS-to-CAS Delay
: 2
SDRAM RAS Precharge Time
: 3
SDRAM CAS latency Time
: 2
DRAM Data Integrity Mode
: Non-ECC
System BIOS Cacheable
: Disabled
Video BIOS Cacheable
: Disabled
Video RAM Cacheable
: Disabled
8 Bit I/O Recovery Time
: 1
16 Bit I/O Recovery Time
: 1
Memory Hole At 15M-16M
: Disabled
Passive Release
: Disabled
Delay Transaction
: Disabled
AGP Aperture Size (MB)
: 4
Autodetect DIMM/PCI Clk
: Enabled
Spread Spectrum
: Disabled
CPU Host Clock
: 100MHz
CPU Warning Temperature
: 50
°
C/122
°
F
Current System Temp.
: 24
°
C/75
°
F
Current CPUFAN1 Speed
: 0 RPM
Current CPUFAN2 Speed
: 0 RPM
Current CPUFAN3 Speed
: 0 RPM
ECS : Quit
↑↓→←
: Select Item
F1 : Help
PU/PD/+/ - : Modify
F5 : Old Values (Shift )F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ADVANCED OPTIONS. The parameters in this screen are for system
designers, service personnel, and technically competent users only. Do not
reset these values unless you understand the consequences of your
changes.
NOTE:
This chapter describes all fields offered by Award Software in this
screen. Your system board designer may omit or modify some fields.
Auto Configuration
Auto Configuration selects predetermined optimal values of chipset
parameters. When Disabled, chipset parameters revert to setup
information stored in CMOS. Many fields in this screen are not available
when Auto Configuration is Enabled.
The Choice: Enabled, Disabled.
Summary of Contents for NuPRO-710 Series
Page 2: ......
Page 4: ......
Page 6: ......
Page 12: ...4 Introduction 1 3 Board Layout Jumpers and Connectors NUPRO 710 NUPRO 711...
