48
Phoenix Award BIOS
4.10 BIOS POST Codes
4.10.1 Normal POST Codes
POST (hex)
Name
Description
C0
Turn Off Chipset And CPU test
OEM Specific-Cache control
cache
Processor Status (1FLAGS)
Verification. Tests the follow-
ing processor status flags:
Carry, zero, sign, overflow,
The BIOS sets each flag,
verifies They are set, then
turns each flag off and veri-
fies it is off.
Read/Write/Verify all CPU
registers except SS, SP, and
BP with data pattern FF and
00. RAM must be periodi-
cally refreshed to keep the
memory from decaying. This
function ensures that the
memory refresh function is
working properly.
C1 Memory
Presence
First block memory detect
OEM Specific-Test to size
on-board memory. Early chip
set initialization Memory
presence test OEM chip set
routines Clear low 64K of
memory Test first 64K mem-
ory.
C2 Early
Memory
Initialization
OEM Specific- Board Initial-
ization
C3
Extend Memory DRAM select
OEM Specific- Turn on
extended memory
Initialization
Cyrix CPU Initialization
Cache initialization
Summary of Contents for NuPRO-796 Series
