50
Phoenix Award BIOS
E CheckSum
Check
Check the intergraty of the
ROM,BIOS and message
F Reserved
10
Auto detec EEPROM
Check Flash type and copy
flash write/erase routines to
0F000h segments
11 Reserved
12 Cmos
Check
Check Cmos Circuitry and
reset CMOS
13 Reserved
14 Chipset
Default
load
Program the chipset regis-
ters with CMOS values
15 Reserved
16
Clock Init
Init onboard clock generator
17 Reserved
18
Identify the CPU
Check the CPU ID and init
L1/L2 cache
19 Reserved
1A Reserved
1B Setup
Interrupt
Initialize first 120 interrupt
Vector Table vectors with
SPURIOUS_INT_HDLR and
initialize INT 00h-1Fh
according to INT_TBL
1C Reserved
1D
Early PM Init
First step initialize if single
CPU onboard
1E Reserved
1F
Re-initial KB
Re-init KB
20 Reserved
21
HPM init If support HPM, HPM
get initialized here
22 Reserved
23
Test CMOS Interface and Bat-
tery Status
Verifies CMOS is working
correctly, detects bad bat-
tery. If failed, load CMOS
POST (hex)
Name
Description
Summary of Contents for NuPRO-796 Series
