System Resources
79
NuPRO-E340
Table B-5: IRQ Lines APIC Mode
Notes:
(1) These IRQs can be used for PCI devices when the onboard device
is disabled. If the IRQ is from ISA, the user must reserve the IRQ for
ISA in the BIOS setup menu.
(2) The BIOS does not open the IRQ 9 setting for the ISA bus.
18
N/A
PCIE Port 0/1/2/3/4/5/6/7,
P.E.G. Root Port, SATA Host
controller, SMBus Controller,
Thermal Controller,
SOL (COM7)
Yes
19
N/A
PCIE Port 0/1/2/3/4/5/6/7,
P.E.G. Root Port, SATA Host
controller, SATA Host
controller#1,
Yes
20
N/A
PCH internal GBE controller,
PCI Slot 3
No
21
N/A
PCI Slot 0, PCI Slot 4
No
22
N/A
PCH HDA, PCI Slot 1
No
23
N/A
EHCI Controller #1, PCI Slot 2
No
IRQ#
Typical Interrupt
Resource
Connected to Pin
Available
Summary of Contents for NuPRO-E340
