8
Getting
Started
Leading
EDGE COMPUTING
2.3
Installing the PCIe-8638 on a Host Computer
1. Power-off the host computer.
2. Unscrew the housing of the host computer using a
(cross-head or flat-head) screwdriver. Open the housing.
3. Locate the PCI Express
®
extension module (PCIe-8638)
and remove it from its packaging. (Wear anti-static
gloves and use an anti-static surface when handling the
module).
4. Install the PCIe-8638 in an available x8 or x16 PCI
Express slot in the host computer. Be sure to firmly
attach the PCIe-8638’s bracket to the backplane of the
host PC.
5. Close the chassis and re-install the housing screws.
CAUTION:
Do not apply power to damaged equipment.
Summary of Contents for PCIe-PXIe-8638 Series
