USB-2405
Quick
Start
Guide Rev.
2.00
USB-2405
4-CH 24-Bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
Getting Started
Package Contents
Your package should contain:
• Rail mount kit
• ADLINK All-in-One CD
• Quick Start Guide
(this document)
• USB-2405
• Stand
• USB cable (2m)
P/N 50-40230-5000
Aug. 23, 2013
Features
Installing the Driver
• Hi-Speed USB 2.0
• USB bus powered
• 24-bit Sigma-Delta ADC with
built-in anti-aliasing filter
• 4-CH simultaneous sampling
analog input, up to 128kS/s
• AC or DC input coupling,
software selectable
• Analog or digital triggering
• Supports 2mA excitation output on
each analog input channel for
IEPE sensor measurement
• Full auto-calibration
• Ready-to-use testing application
(U-Test) provided
1. Download the latest UD-DASK driver & U-Test from:
http://www.adlinktech.com/
and run.
2. Follow the installation instructions
Check Product Package
Install USB-2405 driver
(UD-DASK)
& utility (U-Test)
Connect USB-2405
to USB 2.0/3.0 port
Perform quick test
with U-Test
utility
