5-1
FUEL SYSTEM
CARBURETOR
Removing
•
Remove the R/L side, body cover,
center cover, rear carrier, seat, and
helmet
box
•
Remove the auto-plunger wire from
carburetor.
•
Loose the fuel releasing screw of the
carburetor and release the fuel in
float
chamber
•
Remove the fuel tube and vacuum (-)
pressure
tube.
•
Loose the adjusting and fixed nut of
throttle
cable.
•
Removing the throttle cable.
•
Loose the clamp on intake manifold
and remove the carburetor.
AUTO. PLUNGER STARTER
Check function:
•
After the engine stop after 10 min.
then check resistance on both
terminals.
If there is no resistance between
terminals then change a new
auto-plunger.
Auto-plunger wire
fuel tube
vacuum tube
vacuum tube
