Bobber Valve
Steam Release Valve
Cover
23
Steam Release Valve Cover
The Steam Release Valve Cover is on the
underside of the Lid. Ensure it is clear from debris
before you begin using the Pressure Cooker.
To clean, carefully pull the cover off and clean
using warm, soapy water. Press the cover back
into its place after cleaning is complete.
UNDERSIDE OF LID
Bobber Valve
Gently press the valve up and down 2-3 times and ensure it is clear from
debris before you begin using the Pressure Cooker.
Lid Lock Pin
Gently press the pin and ensure it is clear from debris before you begin
using the Pressure Cooker.
Note:
1. Condensation may collect inside the Heating Base under the
removable Cooking Pot. This is normal. Allow to cool, and then dry
using kitchen cloth.
2. Always make sure that each component (pot, valves, gasket, etc.) is
completely dry before you put back into the Pressure Cooker.
Valve REMOVE