37
36
3.Hold the armrest with both bands and insert the middle hook of the armrest into
the massage chair frame(Figure 3).
4.Align the limit hole of the armrest assembly with the wire inserted with the limit
post of the backrest and insert the armrest(Figure 4).
5.Fix the back end of the armrest with two M6 screws(Figure 5).
6.Fix the front end of the armrest with two M6 screws which has inserted the front
end hook of the armrest into the front end square opening of the massage frame in
the second step(Figure 6).
7. Align the buckle on decorations with the corresponding buckle seat of the armrest
and tighten it(Figure 8).
Method of Usage
Method of Usage
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
3
4
VIII
.
Installation Instructions for Legrest
·
After connecting the wires and the air hose between the legrest and the massage
chair, remove the cable ties and insert the connecting part into the seat (Figure 1).
·
Place the round tubes on the left and right sides of the legrest onto the legrest
support (Figure 2)
·
Next, turn the legrest fixing cover over to cover the round tubes on both sides of
the legrest (Figure 3).
·
Fasten the legrest to the massage chair with two M5 screws (one on each side).
Check whether there is any abnormality during turning up and down, or any tube,
cable or wire is folded. If everything is OK, the legrest is installed (Figure 4).
1
2
