background image

I . I N T R O D U C T I O N  

 

 

Read and follow all instructions, warnings, and notes in this manual before attempting to operate 
your power wheelchair for the first time. If there is any information in this manual which you do not 
understand, or if you require additional assistance for set up or operation, please contact us. 

Your  safety  when  operating  this  product  depends  upon  whether  you  completely  follow  the 
instructions, cautions and warnings in this manual. We are not liable for any damage and/or injuries 
resulting from individual unsafe operation or failure to follow the instructions, cautions and warnings 
in this manual. 

The following symbols are used to identify warnings, notices and operation instructions. All of them 
are  important  for  your  safety.  It  is  strongly  recommended  that  you  read  and  understand  them 
completely and carefully.  

 

 

 

 

 

 

 

The design of the power chair combines the state-of-the-art technology with contemporary styles. 
Its structure for quick assembly and disassembly is, especially, convenient for storing or placing in 
your vehicle while travelling.  We are certain that the best performance, safety, comfort and trouble-
free operation of your wheelchair will add convenience to your daily living. 

For your safety, please ensure that you read and follow all instructions, warnings and notes carefully 
before attempting to operate your power wheelchair for the first time.  

Once you master how to operate and maintain your wheelchair, it is certain that this product will 
give you years of trouble-free service and enjoyment. 

This product model is powered by batteries attached to the wheelchair. We would appreciate your 
questions, comments, and suggestions about this wheelchair and the service you received from us. 

 

WARNING! 

Failure to head the warnings in the manual may result personal 
injury. 

CAUTION 

Failure to heed the cautions in the manual may result in damage 
to the power chair. 

Summary of Contents for Deluxe
















Reviews: