LATERAL ADJUSTMENT
PUSH-TO-OPEN BLUM LEGRABOX DRAWERS
REMOVING DRAWER
INSERTING DRAWER
NOTE:
Please use a star/torx screwdriver for adjusting the Blum Legrabox.
TILT ADJUSTMENT
DEPTH ADJUSTMENT
HEIGHT ADJUSTMENT
DRAWER FRONT REMOVAL
DRAWER FRONT INSTALLATION
2
+
_
2
+
_
min
2.5
+2
-1
CARE & MAINTENANCE
T I P S
•
ADP products are produced from materials that are well suited to the bathroom, however it is important that your bathroom
has sufficient ventilation to avoid excessive moisture. High humidity will lead to permanent dampness and mould, resulting
in deterioration of the materials.
•
Care must always be taken to dry any excessive moisture or water spillage.
C A B I N E T S
•
To maintain the finish on your cabinet use only a soft cloth and weak solution of non abrasive detergent.
•
To remove scratches, marks, etc. on two pack polyurethane, rub gently with car cutting compound, car polish or household
brass/silver cleaner.
•
Goods used in construction are water/moisture-resistant, but not water-proof.
•
All cabinets should be installed at least 300mm away from showers or bathtubs to avoid water damage.
C E R A M I C B A S I N S A N D T O P S
•
To maintain the finish on your ceramic top use only a soft cloth and weak solution of non abrasive detergent.
•
Due to the glazed surface of ceramic tops, scratches cannot be repaired or removed.
•
Due to ceramic being a handcrafted product that is fired at high temperatures, some visual distortion may occur. This is not
a defect but can be seen to add to the beauty of the product.
M E TA L F R A M E
•
To maintain the finish on your metal frame, dust regularly and use only a soft cloth and weak solution of non abrasive
detergent to wipe over the metal frame.
•
Minor scratches can be touched up, please contact ADP to purchase appropriate touch up paint.
