IRF3000 series
Instruction manual v1.1
29
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
8 Technical data
IRF34x1 / IRF38x1
Operating system
Embedded Linux
Hardware
ARM, 64 bit, 4 x 1.6 GHz; 4 GB RAM; 8 GB Flash
Interfaces
Ethernet: 4 x 1 Gbit/s (IRF34) / 8 x 1 Gbit/s (IRF38)
1 x USB
1 x ModbusRTU (RS485, half duplex)
1 x slot for smartcard
1 x slot for mobile communications card (SIM)
1 x slot for microSD memory extension (UHS II)
Devices with mobile communication module: 2 x SMA antenna connection
Only IRF3821 with mobile comm. module: 1 x SMA for external GPS antenna
Digital inputs and outputs (I/O): IRF34: 2I/1O; IRF38: 5I/4O
VPN
Big-LinX, OpenVPN, IPSec
Operating modes
IP router (two subnets); IP router extended (up to 8 subnets);
Transparent Bridge
Mobile (WWAN)
Optional: EU or EMEA + US
Dimensions
See dimensional drawings in chapter 5
Protection class
IP20 (tested by ADS-TEC, not evaluated by UL)
Overvoltage
Category I as per DIN EN 60664-1 (max. 1500 V)
Pollution
Degree 2 as per IEC 61010-1
Power supply
Voltage: 24 VDC ± 20
%
Requirements on the power supply unit:
•
Class PS2 as per IEC 62368-1
– or –
Limited Power Source (LPS) as per IEC 60950-1
•
Short-circuit current: < 8 A
•
For devices with UL certification: NEC Class 2
Ambient temperature in operation
-30 ... +70 °C
for storage
-40 ... +85 °C
You can find further information about the device in the data sheet on our website:
www.ads-tec.com