background image

Industrial PCs OPC5012

 

 

© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen

 

7

 

 

1.7

 

S

TANDARDS

 

The device meets the requirements and objectives of the following EC directives: 

 

 

The device complies with the test specifications for the CE label according to the 
European test standards EN 55022 and EN 50082-2. 

 

The device complies with the test specifications DIN EN 60950 (VDE 0805, IEC 
950) "Safety of Information Technology Equipment". 

 

 

The device complies with the DIN EN 60068-2-6 (sinusoidal vibration) test 
specifications. 

 

 

The device complies with the DIN EN 60068-2-29 (bump) test specifications. 

 

 

Note: 

The manufacturer keeps a corresponding declaration of conformity for the responsible 

authorities and can present that document upon request.  
In order for the device to comply with the legal requirements pertaining to 

electromagnetic compatibility, all connected components and cable connections have to 

meet these requirements as well. Therefore shielded bus and LAN cables with shielded 

plugs should be used and installed as specified in this manual. 

 

1.8

 

M

ODELS

 

Two models of the system are provided: 

 
Platform with CompactFlash: 

 
This platform has no rotating mass storage media (e.g. hard drives) and incorporates an 
embedded operating system (Windows CE.net / XP embedded) for stationary use. 

 
Platform with hard drive: 

 
This model includes a hard drive for stationary use in production environments and 

incorporates standard operating systems. 
 

1.9

 

S

COPE OF DELIVERY

 

Shipment includes the following: 

 

 

1 device 

 

Power plug: 

3 pin Phoenix Contact COMBICON MC 1.5/3-GF-3.81 feed-
through header (already mounted in the device socket) 

 

Fastener set for control cabinet 

 

Service CD  

 

Optional components 

 

 

Operating system 

 

Summary of Contents for OPC5012


























Reviews: