OPC8000 series
10
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
2.9 Standards
The manufacturer hereby declares that this device has been marked with
the CE mark in accordance with the basic requirements and other relevant
conditions of the following European Directives:
2011/65/EU, RoHs Directive
2014/30/EU, EMC Directive
2014/53/EU, RED Directive
2014/35/EU, Low Voltage Directive
A corresponding EU conformity declaration is available for competent authorities at
the manufacturer and can be viewed upon request.
The EU conformity declaration can be requested at
http://www.ads-tec.de/support/support-anfrage.html and is available for download
at http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.
Recommendation for use:
For full compliance with the EMC legislation, all components and
cables used for device connection must also be compliant with these
requirements. It is therefore necessary to employ BUS and LAN
cables with shielded connectors and these must be installed as per
the instructions contained in the instruction manual.
2.10 Scope of delivery
Please check that all of the following components are contained in the packaging:
1 x device
1 x 3-pole lead-through connector from Phoenix Contact; 3-pole screwable 3.81
OPC7 (already plugged into device socket)
QuickStartGuide
Optional scope of delivery:
Operating system
