OPC8000 series
16
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
3.4 Intended use
The Panel PCs are designed for the control and monitoring of machines and equipment.
The unit is intended for installation in electrical panels, consoles and cabinets.
The device has to be assembled, installed and operated within the permissible specifications.
Use in non-specified environments is prohibited.
3.5 Improper use
Operation other than or beyond that described for the device shall be deemed improper use.
The device is not allowed to be used to control vehicles or for applications for which further
approvals beyond the manufacturer's declaration are necessary, e.g. applications with
explosion hazard, medical technology, shipping industry.
The device must not be put into operation in the case of transport damage or nonconformity
with the specifications and, if necessary, must be taken out of operation in the case of
changing conditions.
In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or
damage that is directly or indirectly attributable to the handling of the device.
Should the device have evident signs of damages caused, e.g., by improper operation or
storage conditions or due to improper use or handling, it must be shut down immediately.
Ensure that it is secured against being started up accidentally.
