Patent No. US 8,856,780 CA 2759622
>>
01
OFF
ACC
ON
START
02
OFF
ACC
ON
START
03
04
OFF
ACC
ON
START
05
OFF
ACC
ON
START
06
>>
07
OFF
ACC
ON
START
08
OFF
ACC
ON
START
09
10
11
OFF
ACC
ON
START
12
OFF
ACC
ON
START
13
OFF
ACC
ON
START
14
15
16
OFF
ACC
ON
START
MODULE PROGRAMMING PROCEDURE (2 KEYS) - 1 OF 2
NOTE: To complete this procedure, both OEM
keys are required.
Insert key 1 into ignition.
Turn key 1 to ON position. LED will turn solid
RED.
LED 1 will fl ash GREEN.
Turn key 1 to OFF position.
Remove key 1.
Wait, LED 1 will turn OFF. (This may take up to
30 seconds)
NOTE: If the vehicle is not equipped with an
immobilizer, press and hold the module’s
programming button during steps 7 and 8.
Insert key 1 into ignition.
Turn key 1 to ON position.
If LED turns solid GREEN for 2 seconds:
Module Programming Procedure completed.
If LED turns solid RED, proceed with following
step.
TIME RESTRICTION. Complete steps 11 to 13
within 4 seconds after LED turns OFF.
Remove key 1.
Insert key 2 into ignition.
Turn key 2 to ON position.
Wait, LED will turn solid RED then will turn
OFF.
TIME RESTRICTION. Complete steps 16 and 17
within 4 seconds after LED turns OFF.
Remove key 2.
www.flashlogic.com
Automotive Data Solutions Inc. © 2020
FLC-FO(RS)-FO1B-[FLRSFO1]-EN
PAGE 15 OF 25
• 20201009
DOC.: #71928
