- 7 -
1) CAM ID
Select the camera ID. (001 ~ 255)
2) BPS
Select serial communication speed.(2400 / 4800 / 9600 / 19200)
3) PROTOCOL
Select operating protocol.
COMMAND : Camera controlled by RS-232C command.
FASTRAX : Fastrax protocol.
PELCO-D : Pelco-D protocol.
PELCO-P : Pelco-P protocol.
4) DISP MODE
On screen display is ON/OFF
5) DISP ITEM
-DISP0
Display title and camera ID.
-DISP1
Display title, camera ID and DC Level
6) TITLE
7) SAVE
Save preset parameters of CAM SET MENU.
<
>
CAM SET
CMD
TITLE
<TITLE MENU>
B
C
A
A.
TITLE
B.
Character Table
C.
Command Line
: Move to left
: Move to right
< : Erase a left character
> : Erase a right character
S : Save title
E : End
Press the MENU button to access the "CAM SET” mode.
<END>
1) DEFAULT & EXIT
Set parameters as factory setting and terminate the MAIN MENU.
2)
SAVE & EXIT
Save the changed preset parameter and terminate the MAIN MENU.
3) EXIT
Terminate the MAIN MENU without saving parameters.
Press the MENU button to access the "END” mode.