Composite
Video
Composite video interface.
Com 1
RS-232 terminal monitor for communicating with the internal host motherboard for diagnostics.
Use the enclosed Ethernet cable with the RJ.45 to RS-232 adapter for connection to a host
computer. Default COM settings are 115,200baud, 8 data bits, No Parity, 1 stop bit and no
flow control.
Com 2
RS-232 Adtec API control and status terminal port. Use the enclosed Ethernet cable with the
RJ-45 to RS-232 adapter for connection to a host computer. Default COM settings are 38,400
baud, 8 data bits, No Parity, 1 stop bit and no flow control.
Ethernet
10/100BaseT Ethernet RJ-45 jack.
Power 12
VDC
K - Lock
Kensington Security Slow to be used with a Kensington Slim MicorSave
?
security cable to
prevent unauthorized removal of the server.
Serial
Number
Product Serial Number
Your player should be placed on your local network and will use the default IP address of
192.168.10.48
Software
mediaControl is the control application for Adtec players and servers. It offers list and schedule building as well
as file management and player control. On the following page is an overview of the mediaControl application.
Installation of mediaControl (current version 2.2.43)
For Windows:
The mediaControl software can be installed on Windows XP and 2000 machines. Refer to the system
requirements in Chapter 1 for additional information. Insert the installation CD into your computer. The install
program will automatically launch. If it does not, locate the CD drive via “My Computer” and double-click the
mediaControl Installer icon. The wizard will walk you through the installation process. After installation, the icon
for the application can be found on the desktop and in the start menu in the mediaControl folder.
For MAC:
The mediaControl software can be installed on MAC OSX (10.2 or greater). Refer to the system requirements in
Chapter 1 for additional information. There are a few necessary steps to take prior to installing mediaControl on
a MAC.
1) Locate the RXTXcom.jar in the MACinstall folder on your CD. Place it in the following location - /Macintosh
HD/Library/Java/Extensions
2) Locate the librxtxSerial.jnilib in the MACinstall folder on your CD. Place it in the following location - /Macintosh
HD/Library/Java/Extensions
3) Lock File Modification-DO THIS IN SUPER USER
a) Check and see if /var/spool/uucp exists, if it doesn’t create it
i) chmod 775 /var/spool/uucp
