Front Panel
• 8 Button Tactile Raised keypad:
Mode, Select, Enter, Escape, Up, Down, Left, Right
• Blue Translucent LCD
20 character by 2 row
• Front Panel Host LED’s
Power, Alarm, Link, Busy, MPE
• Front Panel LEDs
Out (Alarm, ASI, GigE, CA)
DTA-3250 Specific
In (2 - ASI Ports, DVB-S 3 Port & Lock , DVB-S 4 Port
& Lock, ATSC 5 Port & Lock, ATSC 6 Port & Lock)
DTA-3254 Specific
In (2 - ASI Ports, ATSC 3 Port & Lock, ATSC 4 Port &
Lock, ATSC 5 Port & Lock, ATSC 6 Port & Lock)
ASI Inputs
• ASI x 2 (BNC)
• 188 or 204 Byte mode
• SPTS or MPTS
• 211 Mbps per input
• 256 PIDs per input
• Fill scrubbing on input
• Input Modes
Auto (Remap all services)
Manual (Add/Drop/Remap PID/Services)
Pass (Pass all services as-is)
MHP Injector
SI Injector
SMPTE-310 Input
• SMPTE-310 x 2 (BNC)
• 188 Byte mode
• SPTS or MPTS
• 19.39 Mbs
QPSK Inputs (Satellite)
3250 (2) 3254 (0)
• QPSK
• Antenna Input
L-Band Input 950 – 2150 MHz
• Input Level
-65 dB to –25 dB
• LNB Power
Automatic Polarity Sensing
(Horizontal - 14V-Vertical - 18V)
Automatic Over and Under Current Protection
22 KHz Tone
(High Frequency Block Up-convert)
DiSEqC
• Symbol Rate
2 to 45 MS/s
• Forward Error Correction (Physical)
DVB Viterbi FEC
Automatic Sensing
1/2, 2/3, 3/4, 5/6, 7/8
Reed Solomon (16 bits)
• 188 or 204 Byte mode
• SPTS or MPTS
• 72 Mbps per input
• 256 PIDs per input
• Fill scrubbing on input
• Modes
Same as ASI
Redundancy
• 1+1 IP and ASI
• ASI x 2 (BNC inputs for auto switch)
• No external controller required
ATSC/QAM Inputs (Terrestrial)
3250 (2) 3254 (4)
• 8VSB x 2 (Type F Female)
• Antenna Input
54 MHz to 864 MHz
• Input Level
80 dB to –0 dB 8VSB
15 dBmv to -15 dBmv (64 QAM)
12 dBmv to -15 dBmv (256 QAAM)
• Channel Bandwidth
6, 7 or 8 MHz
• Channel Bandwidth
6 MHz
• Channel Assignment
US Standard
• Functional
8 VSB Signaling
• Modulation Modes
8 VSB, 64 and 256 QAM Annex B
• Forward Error Correction
Reed Solomon, Trellis Encoding
• 188 or 204 Byte mode
• SPTS or MPTS
• 19.39 Mbps 8 VSB
• 256 PIDs per input
• Fill scrubbing on input
• Modes
Same as ASI
Outputs
• Gigabit Ethernet
SPTS over UDP or RTP
MPTS over UDP or RTP
50 Mbs
Very low jitter
Output Options
• ASI (model is DTA 3250/4-SMPTE)
Mirrored (BNC x 3)
Byte or Burst Mode
54 Mbs Byte
211 Mbs Burst
Jitter less than 150 (nS)
• SMPTE-310 (model is DTA 3250/4-SMPTE)
Mirrored (BNC x 2)
SMPTE-310 option includes ASI
Table Processing
• No Tables
• MPEG Tables
PAT
CAT (if CA is enabled)
PMT
• DVB Tables (Add/Drop/Remap DVB Services)
NIT
SDT
TDT/TOT
EIT
• ATSC Tables (Add/Drop/Remap ATSC Services)
VCT (Cable or Terrestrial)
MGT
STT
RRT
EIT (1-4)
• DCII Tables (Add/Drop/Remap Digicypher services to
DVB or ATSC)
IP Data Encapsulation (ISO 13818-6 MPE)
• EN 301 192 Encapsulation of IP Datagrams over
• Unicast and Multicast Support
• 32 Routes
• 32 PIDs
IP Data de-capsulation (ISO 13818-6 MPE)
• EN 301 192 de-capsulation of IP Datagrams
• 16 PiDs
• 300 Mbs
Conditional Access Encryption
• DVB-Common Scrambling Algorithm (CSA)
• DVB Simulcrypt TS 103 197 v 1.2.1 and SCTE
OpenCAS™ DVS-278 compliant
• FIPS 140-2 hardware based random number
generator (RNG)
• Advanced Encryption Standard (AES)
Adtec Open Secure Transport (OST)
IP based encryption for use with Adtec IRDs
IP Set Top and Computer compatibility
• Approved 3rd Party CA Vendors include:
• CSA:
Irdeto
Conax
EuroCAS
KeyFly
Xcrypt
• AES:
Verimatrix
Host Platform
• PowerPC
• Adtec optimized Linux Kernel
• 10/100 Ethernet RJ-45 (Eth 0)
• 10/100/1000 Ethernet RJ-45 (Eth 1)
• Serial Port (RJ-48)
• USB 2.0 (2)
• IEEE 1394 (Firewire)
• N.C. / N.O. Tally Interface
• XML Configuration
• HTTP, FTP, Telnet, IP Logging, DHCP,
(XCP Adtec encrypted layer 3 protocol)
Power
• 70-240 VAC switching power supply
• 50/60 Hertz
• Rated at 94 Watts return nominal usage 20 watts
Physical
• 19” wide, 1.75” tall, 16” deep, (483 x 44.5 x 406 mm)
• 1 Rack Unit
• Weight 13lbs.
Environmental
• Active cooling (Push pull Fans)
• Operating: 0 to +50 degrees C
• Storage: -30 to +65 degrees C
• Less than 70% RH
• Non-Condensing
• Digital Turn Around Router
• 1 - 3 pin Alarm Tally Plug
• Rackmount Kit:
4 rack mount screws with washers.
• Terminal Kit:
1 - RS232 Interface
1 - Ethernet Cable (10 foot long)
• Adtec Startup CD
• DTA Operations Manual
• US Power Cord (6 foot long)
Note:
DTA 3254
models do not have
QPSK Input ports. They
are replaced with 2
additional Terrestrial
ATSC inputs.
Note: Specifications subject to change without written notice
© 2006 Adtec Digital. Product and company names may be trademarks or registered trademarks of their respective companies.
Power
GigE
IEEE 1394 FireWire
Terminal Interface
Fast Ethernet Interface
ASI Redundancy
Inputs
ASI Inputs
QPSK Inputs
Terrestrial ATSC Inputs
Redundancy
Tally
ASI Outputs
USB 2.0 Interface
GPIO or Serial Port
CACI Slots
SMPTE 310 Outputs
