II
Range of manual
This is the first manual of QC400 drive robotic control system including full description,
drive control for the initial users, to help users select reasonable motor type; followed this
specification for drive control electrical wiring between the machine and the robot in detail.
Precautions
※
Transport and storage
Product package iteration of no more than six;
It is not available in the product box on the climb, stand or place heavy objects;
Cannot use drag the cables attached to the product or handling products;
No collision, scratching the Panel and display screen;
Product box should avoid wet, dry and the rain.
※
Opening inspection
After opening the packaging please confirm whether you purchased the product;
Check whether the products in transit damage;
Control list identifies whether the part is complete, there is no damage;
Product model, lack accessory or transport damage, please contact with me.
※
Wiring
To participate in connections and inspection personnel must have the appropriate
skills for professionals;
Products must be reliable earthling, grounding resistance should be less than 4
ohms; you cannot use the neutral (zero line) instead of ground;
Wiring must be properly and firmly, so as not to lead to product failure or
unexpected consequences;
And surge absorption diode must be connected in accordance with the
regulations are connected with, otherwise you will damage;
Plug or open the front of the chassis, you must cut off the power supply.
※
Maintenance
Must cut off the power before repair or replacement of components
Should check the fault when a short circuit or overload occurs, troubleshooting
before they can restart
Cannot pass off frequently, if required to re-apply after a power failure,
separated by at least 1 minute
※
Others
