Single end input stepping motor drive wiring diagram
Some stepping drive Photocoupler cathode entered together, namely, common
cathode connection, not appropriate for a ADT-8860 controller. Connect
the anode of the optocoupler inputs together, namely, common anode
connection, you should press the Terminal, and PU+, DR+ cannot be together,
otherwise it will damage the pulse interface.
Common anode input stepping motor drive wiring diagram
Servo drive wiring diagram
Because most are based on the finite difference method, method of pulse
parts refer to the difference, many servo drives need a 12-24V power, can
be 10, 11 feet provide a 24V power supply connection varies by different
servo drives, if you are unsure, please consult the company.
Note: the PU+ and the PU-and the DR+, DR-any two four foot can't be directly
connected together, otherwise it will damage the pulse interface.
2.2.2 Digital Input Ports
(
JA
、
JB
、
Handheld box
、
Expansion
)
Digital input interface contains the axis hardware limit signal, defined
as follows