1.2.2
System Processing Interface
1.2.2.1Keys and processing interface description
Operating modes: fully automatic, semi-automatic test machine three modes. Full Auto Mode:
After processing a finished product, continue to the next processing products;
semi-automatic mode: a finished product after processing, stopped at the starting
point, then wait for the "Start" button; test mode: mainly used to test the platform, a
spindle motor do not exercise.
Percentage of the drive speed: 0 ~ 10V analog voltage output.
Processing Status: sports, stop, pause, three states.
Yield: Each finished product processing, data plus 1, where the yield on the bar three times in a
row can be cleared by the output value of the replacement product output is
automatically reset to 0.
The total number of holes: Current products include the total number of holes starting point.
Current hole: Indicates where the current hole number.
Current file: displays the name of the current working file.
Spindle speed: for testing spindle machining speed, the unit is well / min.
Start: Start machining program, begin processing products.
Stop: Stop processing the current program.
Zero: zero return, the general starting point for the establishment of new products, the
requirements to perform at a high level, to ensure safety.
From back: back to the starting point, turned on, and the replacement product, you must return to
系统菜单
系统信息栏
子菜单或按键
界面信息
