Chapter 5. HDSL Network Interface
5-18
TSU 610 User Manual
61200610L2-1
Editing the Temp Map
If further changes to the Temp Map are needed, do the
following:
Applying the Temp Map
Once the Temp Map reflects the desired configuration, use
selections 9
or
10
to apply this configuration to Map A or B,
respectively.
Reviewing Maps
Selections 5
through
7
give a summary of the number of
ports assigned to Map A, Map B, and the Temp Map,
respectively.
Step
Action
Explanation
1
Use
selection 8
to en-
ter the Temp Map edit
mode.
Upon entering this mode, the cur-
sor location moves to DS0 number
one in the DS0 field of the Temp
Map.
The cursor may be moved from one
DS0 to another by using the up and
down arrows until the cursor is lo-
cated at the DS0 number whose as-
signed port needs to be changed.
2
Press the
Enter
key to
cause the cursor to
move into the
P
ORT
field.
The up and down arrows are then
used to scroll through the possible
port selections.
3
Press the
ESC
key
This restores the previous port as-
signment and returns to the DS0
field.
4
Press the
Enter
key
This saves the current selected port
and returns to the DS0 field.
Once the cursor is again located in
the
Temp Map DS0
field, press the
ESC
key a second time to return to
selection 1
below the Temp Map
display.
Summary of Contents for 1200610L2
