Chapter 3. Operation
61200610L2-1
TSU 610 User Manual
3-11
T-Watch Pro/EIA-232 Connection
To set up the TSU 610 to work with T-Watch Pro over a direct
EIA-232 connection, the following steps are required:
SNMP
The ADTRAN TSU 610 supports the Simple Network
Management Protocol (SNMP) through the chain-in (SLIP)
interface. See Appendix B, Understanding SNMP for detailed
information.
To use SNMP with the TSU 610, do the following:
Step
Action
1
Set the
U
NIT
ID
and the
P
ASSCODE
using the terminal
mode.
See Unit ID on page 4-23 and Change/Set a Passcode on
page 4-22 for more details.
2
Set the
C
ONTROL
P
ORT
RATE
to the same setting as the
PC Com port.
3
Connect the
PC C
OM
PORT
to the
C
HAIN
-I
N
PORT
on
the TSU 610 using the DB25 to modular adapter and
6-foot modular cable.
4
Follow the installation instructions for T-Watch Pro to
start the program and connect to the unit.
Step
Action
1
Set
CONTROL PORT
to
SLIP
for Chain-In Port.
2
Load the appropriate MIB browser into the Network
Management Station.
This is available on the ADTRAN webpage at
http://www.adtran.com)
.
The MIB browser issues SNMP gets/sets to the TSU
610.
Summary of Contents for 1200610L2
