ADTRAN 424RG ONT, Quick Start Manual

61287781F1-13A

9

E

NABLING

 G

UEST

 SSID

S

To allow a guest to have access to your network, the 424RG provides “guest” settings for the network/SSID. This enables your guest 
access to the Internet while denying them access to your local network. To enable this setting, complete the following steps:

NOTE:

Guest SSIDs can only be enabled for the 2.4GHz Service.

Enabling a Guest SSID for Your 2.4GHz Wireless Service

To enable a guest SSID for your 2.4GHz Wireless Service, complete the following steps:

1. On the side menu, select the 2.4GHz option and 

Figure 8

 will be displayed.

2. If you want to provision a new SSID name for a Guest SSID, select the 

Enabled

 check box adjacent to the first entry in the SSID 

column in the “Wireless - Guest/Virtual Access” Points” table. For example, the Guest SSID would be 

ADTN2.4G_Guest1

.

3. Select 

Apply/Save

.

Figure 8. Wireless 2.4GHz - Basic

ADTN2.4_Guest1

ADTN2.4_Guest3

ADTN2.4_Guest2

Wireless 2.4 GHz - Basic

This page allows you to configure basic features of the wireless interface. You can enable or disable the wireless LAN interface, hide the network 
from active scans, set the wireless newtork name (also known as SSID) and restrict the channel set based on country requirements.
Click “Apply/Save” to configure the basic wireless options.

ADTN2.4G

ADTN2.4G_Guest1

ADTN2.4G_Guest2

ADTN2.4G_Guest3

Logout