61287781F1-13A
7
Setting or Changing Security for Your 5.0GHz Wireless Service
To set or change the security for your 5.0GHz Wireless Service, complete the following steps
1. With
5.0GHz
and then
Security;
2. WPS should be
Enabled
(set as Factory Default). If it is not, in the window adjacent to
Enable WPS
, select the check mark so
Enable
is displayed.
3. If you want to change the
Network Authentication
type for 5.0GHz, select a new value from the drop-down list.
4. In the window adjacent to
WPA/WAPI passphrase
, enter a password that will be used for this wireless service.
5. Select
Apply/Save.
Figure 6. Wireless 5.0GHz - Security
Select SSID
Network Authentication
WPA/WAPI passphrase
Logout
Summary of Contents for 424RG ONT
Page 10: ...10 61287781F1 13A...
