© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.
6.3 Additional Software References
Please browse the
for available technical documentation.
6.4 Configuring the ADTRAN 7310-8 Gateway for AWS
To configure the ADTRAN 7310-8 gateway for use with AWS, you will need to upload the CUPS certifications to the
gateway and then provision and start the gateway’s packet forwarding program for communication with AWS. The
steps required to complete these configurations are provided in the following sections.
6.4.1 Uploading CUPS Certifications to the 7310-8 Gateway
The first step in provisioning the ADTRAN 7310-8 gateway for use with AWS is to upload the configured CUPS
certifications to the gateway. To upload the CUPS certificates, follow these steps:
1.
Acquire the 7310-8 gateway IP address through either the ADTRAN IoT app or another process.
2.
Enter the gateway IP address in a web browser, and be sure to specify port 5000 is used. Enter the IP
address and port in the following format:
X.X.X.X:xxxx
; for example,
10.0.0.248:5000
.
3.
Upload the 4 CUPS certificates created in
Adding an IAM Role for CUPS Server
4.
Enter the gateway’s 5-digit PIN (last 5 digits of the device’s serial number).
5.
Select
Submit
to upload the certificates to the gateway.
6.4.2 Provisioning and Starting the Packet Forwarding Program
