Page 46
Applying Security Services to Network Zones
4.
To delete all trusted domains from the CFS Exclusion List,
click
Delete All
.
5.
On the
Security Services > Content Filter
page, click
Accept
.
Applying Security Services to Network Zones
A network zone is a logical group of one or more interfaces to
which you can apply security rules to regulate traffic passing
from one zone to another zone.
Security services such as Gateway Anti-Virus are automatically
applied to the LAN and WAN network zones. To protect other
zones such as the DMZ, you must apply the security services to
the network zones.
To apply services to network zones:
1.
Navigate to the
Network
>
Zones
page.
2.
In the Zone Settings table, click the
Configure
icon for the
zone where you want to apply security services.
3.
In the Edit Zone dialog box on the General tab, select the
checkboxes for the security services to enable on this
zone.
4.
On the Edit Zone page, select the checkboxes for the
security services that you want to enable. Then, Click
OK
.
5.
To enable security services on other zones, repeat steps 2
through step 4 for each zone.
Summary of Contents for NetVanta 2730
