NetVanta 3000 Series Hardware Installation Guide
OVERVIEW
61200860L1-34L
Copyright © 2006 ADTRAN, Inc.
33
NetVanta 3305 Rear Panel Interfaces and LEDs
NET/DBU Option Slots
The
SLOT x NET/DBU
option slots support various NIM plug-in option modules. These option
modules are described in the section
10/100BaseT Ethernet Interface and Activity LEDs
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors with LEDs. The amber activity LED
flashes when data traffic is being sent or received on the Ethernet port. The green link LED is on when
the router has a good connection to the LAN. The Ethernet port provides the following:
•
10BaseT or 100BaseT with a single connector
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) which provides for local management and
configuration (via a DB-9 female connector).
Power Connection
The rear panel has a power input for connection to the power supply. Power supplies are shipped with
final destinations in mind. For example, domestic routers are shipped with a wallmount supply and
international routers are shipped with a universal input lump-in-line supply with the appropriate
cables. All of the 1U-high products have universal power supplies and are shipped with the appropriate
cable. Please refer to
on page 66 for connection details.
NetVanta 3430
The NetVanta 3430 is a high-performance, modular IP access router designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, point-to-point (PPP), multilink PPP,
or Ethernet networks.
This section includes a list of features, a list of shipping contents, and a description of the unit’s front and
rear panel designs. For hardware installation topics such as mounting the unit, installing option cards, and
installing the optional SODIMM, refer to the following sections:
•
•
•
Installing Dial Backup and Network Interface Modules
•
Installing a SODIMM for Expandable Memory
For information on router configuration for a specific application, refer to the quick configuration
documents provided on your
ADTRAN OS System Documentation
CD. For details on the command line
interface, refer to the
AOS Command Reference Guide
(also included on your CD).
Connection directly to an external modem requires a cross-over cable.
