OVERVIEW
NetVanta 3000 Series Hardware Installation Guide
38
Copyright © 2006 ADTRAN, Inc.
61200860L1-34L
NetVanta 3448 Features and Specifications
•
Single-slot, dual-Ethernet modular IP router
•
Modular Network Interface: 56k/64k DDS, T1/FT1, T1/FT1 + DSX-1, Dual T1, E1/FE1, E1/FE1 +
G.703, or ADSL (Annex A or Annex B), SHDSL, or serial interface
•
High performance processor
•
Hardware encryption engine embedded
•
On-board flash memory (32 MB)
•
Expandable DDR SDRAM via Small Outline Dual Inline Memory Module (SODIMM) (1 GB max.)
•
Expandable flash memory storage via a CompactFlash® (CF) card slot on the front panel
•
Two integrated 10/100 BaseT WAN/LAN ports
•
Integrated 8-port fully-managed Ethernet switch
•
Switch ports can optionally be equipped to provide (802.3af/Legacy) Power Over Ethernet capability
•
ADTRAN Operating System (AOS) Command Line Interface (CLI)
•
User-friendly, web-based Graphical User Interface (GUI)
•
Modular IP access routers for MPLS, Frame Relay, Multilink Frame Relay, PPP, Multilink PPP,
PPPoE, ATM and HDLC networks
•
Standards-based BGP, OSPF, RIP, static routing, and bridging protocols
•
Integral stateful inspection firewall protects against Denial of Service (DoS) attempts
•
Flash memory supports multiple images of AOS
•
Interchangeable Network Interface Modules (NIMs)
•
Dial backup to any PPP-compliant device
•
Analog modem, ISDN BRI (U or S/T), or serial Dial Backup Interface Modules (DIMs) available
•
500 IPSec VPN tunnels (optional) with DES, 3DES, and AES encryption
•
Compatible wit h IPSec VPN-equipped devices
•
Quality of Service (QoS) with class-based weighted fair queuing (CBWFQ), low latency queuing
(LLQ), weighted fair queuing (WFQ), and DiffServ marking
•
Built-in alert and logging mechanisms
•
Network Address Translation (NAT/NAPT) and NAT Traversal version 2
•
NAT-compatible SIP ALG
•
DHCP client, server, and relay
•
XAUTH including RADIUS, RSA SecurID, and
•
TFTP, FTP, XMODEM for firmware upgrades and maintenance updates
•
Telnet, HTTP, SSH, SSL, Syslog, craft/console port, or SNMP management options
•
Field-upgradable and remotely configurable
•
Supports up to two T1s of bandwidth
•
1U-high desktop or rackmountable metal enclosure (requires rackmount kit P/N 1200827E1, which
must be ordered separately, for rack mounting)
•
Size: 1.7-inch H x 11.7-inch W x 7.5-inch D
•
AC Power Requirements: Auto-ranging power, 100 to 250 VAC, 50/60 Hz, 0.4A max
•
RoHS compliant (Telecommunications exemption)
