Option Modules
NetVanta 3000 Series Hardware Installation Guide
52
Copyright © 2006 ADTRAN, Inc.
61200860L1-34L
NetVanta E1/FE1 NIM (P/N 1200868E1/L1)
The NetVanta E1/FE1 NIM (see Figure 21) provides a WAN-E1 interface for the NetVanta 3000 Series
meeting the requirements of ITU-T G.703/G.704. The module provides a single 2.048 Mbps network
interface. See Table A-8 on page 77 for the pinouts. See Table A-14 on page 80 for the DBU connector
pinouts. An optional DIM is required for dial backup applications.
Figure 21. NetVanta E1/FE1 NIM
WA
N-E
1
DBU
Features and Specifications
Operating Modes
•
Frame Relay, Multilink Frame Relay
•
PPP, Multilink PPP
•
HDLC
WAN-E1 Interface
•
Supported Standards: ITU G.703,
ITU-T G.704 (CRC-4), ITU-T G.823,
ITU-T G.797
•
Line Rate: 2.048 Mbps +50 PPM
•
Line Code: AMI or HDB3
•
Framing: FAS with optional CRC-4
•
FE1 Line Rate: Channelized timeslot (in
multiples of 64 kbps)
•
Receiver Sensitivity: -30 dB
•
Connector: RJ-48C
Clock Source
•
Network
•
Internal
Diagnostics
•
Test Pattern Generation and Detection:
QRSS, 511, all ones, all zeros
•
Network loopbacks
•
Network performance data (15 minutes
and 24 hours)
•
Alarm generation and detection
Compliance
•
EMC - see
•
AS/ACIF S016
•
ETSI TBR 12/TBR 13
•
EN 60950
•
IEC 60950
•
AS/NZS 60950
•
RoHS compliant (1200868E1 only)
(Telecommunications exemption)
Environmental
•
Operating temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D
