NetVanta 3000 Series Hardware Installation Guide
Option Modules
61200860L1-34L
Copyright © 2006 ADTRAN, Inc.
43
2.
OPTION MODULES
The NetVanta 3000 Series (with the exception of the 3120 and 3130) accepts several option modules
designed to meet a variety of networking requirements. The option modules are of two types: plug-in
network interface modules (NIMs) and plug-on dial backup interface modules (DIMs).
NIMs are cards which plug directly into the option module slots (labeled
SLOT
1
NET/DBU
or
SLOT
2
NET/DBU
), located on the rear of the base unit. These cards provide the following types of
interfaces:
•
NetVanta 56K/64K NIM (P/N 1200861L1)
•
NetVanta T1/FT1 NIM (P/N 1202862L1)
•
NetVanta T1/FT1 NEBS NIM (P/N 1200862L2#NEBS)
•
NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1)
•
NetVanta Dual T1 NIM (P/N 1200872L1)
•
NetVanta E1/FE1 NIM (P/N 1200868E1/L1)
•
NetVanta E1/FE1 + G.703 NIM (P/N 1200878E1/L1)
•
NetVanta Serial NIM (P/N 1200866E1/L1)
•
NetVanta SHDSL NIM (P/N 1200867L1)
•
NetVanta ADSL NIM, Annex A (P/N 1200869E1/L1)
•
NetVanta ADSL NIM, Annex B (P/N 1200889E1/L1)
DIMs are plug-on cards which plug directly on to the NIM prior to installation into the base unit. A DIM
must be plugged on to a NIM in order for the
DBU
port on the NIM to be active. The NetVanta 3000 Series
supports three DIMs (only one DIM per slot may be installed):
•
NetVanta Analog Modem DIM (P/N 1200864L1)
•
NetVanta ISDN BRI DIM (P/N 1200865L1)
•
NetVanta ISDN S/T DIM (P/N 1200875L1)
•
NetVanta Serial DIM (P/N 1200886L1)
This section describes each module, providing individual card shipping contents, specifications, and
features. Refer to
on page 75 for pinout information.
on page 68 provides information on installating the modules.
