Physical Description
NetVanta 6310/6330 Series Hardware Installation Guide
16
Copyright © 2013 ADTRAN, Inc.
61700100G1-34F
2.
PHYSICAL DESCRIPTION
The NetVanta 6310/6330 Series are multiservice IP business gateways designed for use in integrated voice and
data service offerings to small-to-medium sized businesses worldwide. There is one model in the NetVanta 6310
Series: the NetVanta 6310 PRA/PRI/E1/T1 unit. There are four models in the NetVanta 6330 Analog Series: the
8 FXS model, 16 FXS model, 24 FXS model, and 16 FXS + 8 FXO model. All NetVanta 6310/6330 Series
models include a modular wide area network (WAN) interface(s), two 10/100Base-T Ethernet ports, an
integrated router, stateful inspection firewall, and transparent Session Initiation Protocol (SIP) proxy.
Shipping Contents
Each NetVanta 6310/6330 Series units are shipped in their own cardboard shipping carton. Open each carton
carefully, and avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit,
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Support
page on
the ADTRAN website at
http://www.adtran.com/support
).
Shipments of the NetVanta 6310/6330 Series include the following items:
•
NetVanta 6310 or NetVanta 6330 Series base unit
•
A detachable power cable with a grounded, three-prong plug
•
Mounting brackets and screws
•
Quick start guide
NetVanta 6310 Front Panel Design
The NetVanta 6310 front panel is shown below.
Table 1 on page 19
describes all of the LEDs.
NetVanta 6310 Front Panel Features
Status LEDs
The status LEDs are located on the lower left side of the unit. The
STATUS
LED indicates the unit’s
status. The
PRI
LED reflects the PRI interface. The
SLOT 1
and
SLOT 2
LEDs reflect the status of a
NIM2/VIM2 installed in NIM2/VIM2 option slots (located on the rear panel). The
LAN 1
and
LAN 2
LEDs reflect the status of the local area networks (LANs).
CompactFlash Slot
The
CompactFlash
slot supplies nonvolatile configuration and compressed code storage. CompactFlash
densities from 64 to 1024 MB are supported.
Figure 1. NetVanta 6310 Front Panel Layout
STATUS
PRI
SLOT 1
SLOT 2
LAN 1
LAN 2
NetVanta 6310
CompactFlash