Option Modules
NetVanta 6310/6330 Series Hardware Installation Guide
28
Copyright © 2013 ADTRAN, Inc.
61700100G1-34F
NetVanta Quad T1/E1 EFM NIM2 (P/N 1700106G1)
The NetVanta Quad T1/E1 EFM NIM2 (shown in
Figure 9
) provides a WAN-T1/E1 EFM interface for the
NetVanta 6310/NetVanta 6330 Series. See
Table A-10 on page 46
for the T1/E1 connector pinouts.
Figure 9. NetVanta Quad T1/E1 EFM NIM2
T1/E1 EFM
1
2
3
4
Features and Specifications
4xT1 Interfaces
•
Supported Standards: AT&T TR 62411,
AT&T TR 54016, Bellcore TR 194,
ANSI T1.403
•
Line Rate: 1.544 Mbps ±75 bps
•
Line Codes: AMI or B8ZS
•
Framing: D4 (SF) or ESF
•
Input Signal: 0 to -36 dB (DS1); Support
for Nx64 on all T1 interfaces (1 through 4)
•
Line Build-Out: 0, -7.5, -15, -22.5 dB
(long), 0 to 655 ft (short)
•
Connector: RJ-48C
4xE1 Interfaces (Future)
•
Supported Standards: ITU-T G.703, ITU-T
G.704 (CRC-4),
ITU-T G.823, ITU-T G.797
•
Line Rate: 2.048 Mbps ±50 PPM
•
Line Codes: AMI or HDB3
•
Framing: FAS/NFAS with optional CRC-4
•
Input Signal: 0 to -30 dB (DS1) on all E1
interfaces (1 through 4)
•
FE1 Line Rate: Channelized time slot (in
multiples of 64 kbps)
•
Connector: RJ-48C
Clock Source
•
CPE Operating Mode: Line
•
CO Operating Mode: Internal
Compliance
•
EMC - see
Electromagnetic Compatibility
(EMC) Table on page 6
.
•
T1: ACTA/FCC Part 68, IC CS-03
•
E1: AS/ACIF S016, ETSI TBR 12/TBR 13
•
EN 60950-1
•
UL/CUL 60950-1
•
AS/NZS 60950-1
•
IEC 60950-1
•
RoHS compliant (Telecommunications
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
Physical
•
Dimensions: 4.25-inch W x 4.25-inch D
