NetVanta 6310/6330 Series Hardware Installation Guide
Option Modules
61700100G1-34F
Copyright © 2013 ADTRAN, Inc.
31
NetVanta ADSL2+ Annex A NIM2 (P/N 1700114G1)
The NetVanta ADSL2+ Annex A NIM2 (see
Figure 12
) adds ADSL capability to the NetVanta 6310/6330
Series. The module provides a single ADSL, ADSL2, or ADSL2+ network interface to support rates up to
25 Mbps. See
Figure A-6 on page 45
for the ADSL2+ pinouts.
Figure 12. NetVanta ADSL2+ Annex A NIM2
ADSL2+
Annex A
Features and Specifications
Operating Mode
•
Line termination (CO)
•
Network termination (CPE)
ADSL2+ Interface
•
Supported Standards:
–
ITU-T G.992.1 Annex A
–
ITU-T G.992.3 Annex A ADSL2
–
ITU-T G.992.5 Annex A ADSL2+
–
ITU-T G.992.3 Annex L READSL2
–
ITU-T G.992.3 Annex M
–
ANSI T1.413 Issue 2
•
Connector: RJ-11C (6-pin jack, inner
pair)
•
Dying gasp
ATM
•
Multiple Protocol over AAL5
(RFC 2684)
•
PPP over ATM (RFC 2364)
•
PPP over Ethernet (RFC 2516)
•
ATM Forum UNI 3.1/4.0 PVC
•
ATM class of service (UBR)
•
ATM F5 OAM
•
Up to 16 virtual circuits
Compliance
•
EMC - see
Electromagnetic
Compatibility (EMC) Table on page 6
.
•
ACTA/FCC Part 68
•
AS/ACIF S043
•
IC CS-03
•
EN 60950-1
•
IEC 60950-1
•
UL/CUL 60950-1
•
AS/NZS CISPR22
•
RoHS compliant (Telecommunications
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
Physical
•
Dimensions: 4.25-inch W x 4.25-inch D
