SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
104
Field Name
Description
Remote Loopback
Click to enable on-demand link diagnostics, including bit-error-rate approximation.
Active Mode
Click to enable this feature.
Ethernet Service OAM (802.1ag/Y.1731)
section
WAN Interface
Select the WAN interface that you want to test.
MD Level
(
Appears for the 802.1ag option only
) Select the domain level for this maintenance domain.
Options are
0
-
7
. The larger the domain, the higher the value you should select.
MD Name
(
Appears for the 802.1ag option only
) Enter the name of the maintenance domain, e.g., Broadcom.
MA ID
(
Appears for the 802.1ag option only
) Enter the maintenance association ID, e.g., BRCM.
MEG Level
(
Appears for the Y.1731 option only
) Enter the level of the maintenance entity group.
MEG ID
(
Appears for the Y.1731 option only
) Enter the ID of the MEG.
Local MEP ID
Enter the ID of the local maintenance entity group end point.. Options are
1
-
8191
. The default is
1
.
Local MEP VLAN ID
Enter the VLAN ID of the local MEP. Options are
1
-
4094
. The default is
-1
(no VLAN tag).
CCM Transmission
Click to enable continuity check message transmission.
Remote MEP ID
Enter the ID of the remote MEP. Options are
1
-
8191
. The default is
-1
(no remote MEP).
Loopback and Linktrace Test
section
Target MAC
Enter the MAC address for the test, e.g., 02:10:18:aa:bb:cc.
Linktrace TTL
Enter the maximum number of hops allowed. Optinons are
1
-
233
. The default is
-1
(no limit).
Loopback Result
Displays the results of the loopback test.
Linktrace Result
Displays the results of the linktrace test.
Ping Host
On this page you can ping a server by host name or IP address.
1. In the left navigation menu, click
Diagnostics Tools
>
Ping Host
. The following page appears.
2. Enter the host name or IP address.
