SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
62
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Filter Name
Enter a descriptive name for this filter.
IP Version
Select the IP version for this filter. Options are
IPv4
and
IPv6
. The default is
IPv4
.
Protocol
Select the protocol to be associated with this incoming filter. Options are
TCP/UDP
,
TCP
,
UDP
, or
ICMP
.
Source IP address [/prefix length]
Enter the source IP address for rule. For IPv6, enter the prefix as well.
Source Port (port or port:port)
Enter source port number or range (xxxxx:yyyyy).
Destination IP address [/prefix
length]
Enter the destination IP address for rule. For IPv6, enter the prefix as well.
Destination Port (port or port:port)
Enter destination port number or range (xxxxx:yyyyy).
DROP
Select this option to drop packets that meet this filter's requirements. The
packets are deleted.
WAN Interfaces
Click to apply this rule to all WAN interfaces or only certain types. Options
are
Select All
or the interfaces defined for your network. The default is
Select All
.
