SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
98
Multicast
Multicast methodology is used for applications shipping information simultaneously to multiple destinations. The most common scen-
ario is Internet television and other streaming media. In IP Multicast, the implementation occurs at the IP routing level, where
routers create the most efficient distribution paths for packets sent to a destination.
On this page, you can configure the multicast settings.
1. In the left navigation bar, select
Advanced Setup
>
Multicast
. The following page appears.
2. Modify the settings as needed, using the information in the table below. The same fields are provided for both IGMP and MLD
configuration.
3. To add addresses to the exception lists, in the
Group Exception List
tables, enter any additional address and mask inform-
ation and then click
Add
.
Note:
For the IGMP list, the
Group Address
must be between 244.x.x.x and 239.x.x.x. For the MLD table, the
Group Address
must be a valid IPv6 address.
