SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
108
l
PIN entry: Mandatory method of setup for all WPS-certified devices. Options are:
l
Enter STA PIN
: You must enter the (input) station PIN from the client.
l
Use AP PIN
: The access point (AP) generates the device PIN.
l
PBC (Push Button Configuration): Uses a simulated push button in the software. (This is an optional method on
wireless clients.)
Note:
To use the PIN method, you need a Registrar (access point/wireless gateway) to initiate the registration between a new
device and an active access point/wireless gateway. The PBC method may also need a Registrar when used in a special case where
the PIN is all zeros.
Seven types of network authentication modes are supported: Open, Shared, 802.1X, WPA2, WPA2-PSK, Mixed WPA2/WPA, and Mixed
WPA2/WPA-PSK.
1. In the left navigation bar, click
Wireless
>
Security
. The following page appears.
2. Modify the settings as needed, using the information provided in the field description table below and in the sections
that explain each authentication method.
The fields in the
WPS Setup
section are described in the following table.