SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
109
Field Name
Description
Enable WPS
This option is
disabled
by default. To
enable
WiFi Protected Setup, select
Enabled
.
Add Client
(
Available for
WPA-PSK
,
WPA2-PSK
and
Open
Network Authentication
methods
) Select the
method for generating the WPS PIN. Options are:
l
Enter STA PIN
: Type the input station PIN for the client in the field below the radio
button. Click
Add Enrollee
. The PIN is verified.
l
Use AP PIN
: The entry field and the
Set Authorized Station MAC
field disappear.
Note:
If the
PIN
and
Set Authorized Station MAC
fields are left blank, the
PBC
(push-button)
mode is automatically made active.
Set Authorized
Station MAC
(Available only when
Enter STA PIN
is selected
) Enter the MAC address of the authorized (input)
station in format: xx:xx:xx:xx:xx:xx.
Set WPS AP
Mode
Select how security is assigned to clients.
l
Configured
: The gateway assigns security settings to clients. This is the default.
l
Unconfigured
: An external client assigns security settings to the gateway.
Device PIN
This value is generated by the access point.
3. In the
Manual Setup AP
section, select the SSID for the device that you want to configure. The default is the wireless
band defined for your gateway.
4. Select the
Network Authentication
method and then fill in the fields that appear. The default method is
Mixed
WPA2 / WPA-PSK
. Detailed instructions are provided for each method in the following sections:
l
"Open and Shared Authentication"
l
l
"WPA2 and Mixed WPA2/WPA Authentication"
l
"WPA2-PSK and Mixed WPA2/WPA-PSK Authentication"
5. Click
Apply/Save
to commit your changes.
Open and Shared Authentication
The same configuration fields apply for both
Shared
and
Open
authentication types except that
WEP Encryption
is enabled by
default for the
Shared
method.
The following fields appear when you select
Open
or
Shared
in the
Network Authentication
field.